交通局千名干部下基层 排忧解难促发展活动方案（Transport bureau a thousand cadres at the grass-roots level to promote the development of development programme）.docVIP

交通局千名干部下基层 排忧解难促发展活动方案（Transport bureau a thousand cadres at the grass-roots level to promote the development of development programme） Culvert construction scheme I. project quantity There are 285 x 250 double-hole boxes in this contract with 52.5 m / 2 seats, 285 x 250 double-hole cases with 60m / 2 seats, 300 x 250 cases with 101.4 m / 1 seats, 450 x 300 cases of 210.4 m / 1, and 182m / 2 seats of reinforced concrete circular pipe. Ii. Team and schedule The plan is to arrange the construction of three culvert teams, each of 42 people, a total of 126 people, after the start of the work, such as the labor shortage from local recruitment. The culvert team constructed 285 x 250 double-hole boxes with 52.5 m / 2 seats, 285 x 250 double-hole cases with 60m / 2 seats; Construction 300 x 250 boxes with 101.4 m / 1, and 182m / 2 seats of reinforced concrete circular pipe; Culvert three teams construction 450 by 300 boxes of 210.4 m / 1. Schedule: 30 days from 28 October to 26 November 2004; Construction period of 70 days from November 27, 2004 to February 4, 2005. Construction method 1. Circular pipe of reinforced concrete 1.1 basic engineering The excavation of foundation pit was excavated by artificial cooperative machinery. After the excavation of foundation pit was qualified, the paving layer was paved, and the compaction of the small vibratory roller was compacted, and the compaction degree reached more than 95%. The foundation concrete was poured twice before and after the installation of the pipe section, and the combination of old and new concrete and the combination of the pipe and concrete and the wall of the pipe were mainly controlled, and the maintenance was carried out in time. 1.2 construction Culvert pipe by the designated factory prefabrication, shipped to the site after inspection, the accurate calculation of pipe culvert length and the pipe joint configuration and the position of the end wall, starting from the downstream installation, make joint instal