裂缝补强技术（Crack strengthening technique）.doc

裂缝补强技术（Crack strengthening technique） Crack strengthening technique The four patches can be used alone or in combination. For example, crack damage bridge repair, first of more than 0.2mm crack repair by grouting method, and then all the concrete surface coating treatment, cover all the small cracks. But for the thick pavement cracks and piers with trench filling method is appropriate; concrete bridge of Binhai, in order to prevent corrosion of reinforcement, prevent concrete from corrosion of harmful ions, can use waterproof treatment. 1 、 low pressure grouting method 1.1 scope of application Suitable for concrete crack repair with width of 0.2 ~ 3.0mm. 1.2 materials and implements Sealing glue; filling glue; elastic low pressure injector; grouting nozzle Repair process The procedures of repairing concrete cracks with low pressure grouting method are as follows: crack cleaning, paste grouting nozzle and sealing crack, test leakage, preparation grouting fluid, pressure grouting, two times grouting to clean surface. 1.3.1 crack cleaning: if the seam is blocked by dirt dust, it can be sucked out with a small industrial vacuum cleaner. The surface of concrete about 5cm along the crack should be wiped off with a damp cloth, but it should be noted that no water is allowed in the seam. 1.3.2 paste grouting mouth and closed fracture grouting should be used: mouth sealing glue a paste, spacing and width of crack grouting mouth, the spacing refer to table 2. When the amount of cracks is large, the following are the specific measures. First of all, in the mouth is expected to paste the location of the crack affixed with medical white tape, and then narrow hair system will be sealing glue along the cracks back and forth brushing, so that cracks closed. After about 10 minutes, remove the adhesive tape to reveal the seam. Then, with the grouting mouth sealing glue on the reserved small joints straddle stick on the whole base to be wrapped tightly with sealing glue, curing surrou