蛆虫养殖3（Maggots breed 3）.doc

蛆虫养殖3（Maggots breed 3） 1, determine the scale of farming: breeding scale according to the expected daily output to determine. To farm a Nissan 100 kg of fresh maggots as an example, in the design of farms should consider the following aspects: The adult feeding scale: per million adults in the domestic egg eggs daily peak after 5~6 days of feeding, can produce 4 kg of fresh maggots, if Nissan is 100 kg of fresh maggots, feeding in 250 thousand adults oviposition peak, taking into account other factors, a production unit of maggot raising minimum scale 300 thousand head. If taking into account the fly out update, an update cycle for 4 days, therefore, to prepare for the two units of the fly and the scale of production, in order to ensure the continued supply of 100 kg of maggot eggs to nissan. The method of feeding adult needs at present is in the area of adult feeding and housing support 2. A 15~20 cubic meters of room can be placed stereo 0.5 cubic meters of fly cage 20~25, feeding the adults can meet the need of Nissan 100 kg maggot eggs. The feeding larvae needed per square meter area of farming area can produce 500 grams of fresh maggots, Nissan 100 kg of fresh maggots is 200 square meters of the farming area. Outdoor farming more than flat farming, coupled with walkways and so on, covers an area of 250 square meters, according to 5 production units for continuous production, covering an area of 1250 square meters. Indoor production of more three-dimensional breeding, according to 4 calculations, 1 70 square metres of room constitute 1 production units, 5 production units need to build 350 square meters of production plant size. The construction of 2, aquaculture facilities: the real fly: specifically for adult feeding, indoor air fresh, The temperature is kept at 24~30 degrees centigrade, the relative humidity is 50%~70%, and the illumination is more than 10 hours per day. Large glass windows should be left in the south for daylight. Each room area according to