限速器效验（Overspeed check）.docVIP

限速器效验（Overspeed check） Elevator speed limiter is one of the important parts of elevator operation safety protection. In accordance with the requirements of the supervision and inspection procedures for elevators by AQSIQ, check the speed limiter for elevators. The detection is based on the GB7588-2003 elevator manufacturing and installation of safety standards as the basis, using XC-3 speed governor testing instrument as a tool to develop the overspeed detection operation as the detection of the guidance for the elevator inspection and inspection work to provide scientific, impartial and objective data. During the actual test of the speed limiter of the safety component of the elevator, some methods of operation, judgment and treatment have been put forward and discussed with the others. Speed limiter; field test; actual operation process Inspection personnel code: No not involved with overspeed data detection operation, measuring speed limiter with objective data and input to the speed limiter tester in operation. Electrical switches and mechanical movement detection and data acquisition speed limiter. Reduce subjective subjective errors to zero. Pre test preparation: 1 check A) the model on the nameplate of the speed limiter, the production number, and whether the rated speed is consistent with the application form; (b) check the speed limit certificate, the label is intact, the base is fixed, the electrical switch is flexible; C) check the governors appearance to be clean, no oil, seal, the seal should be intact; (d) check the main power supply of the elevator and cut off the safety of the sheave of the speed limiter and the sheave of the speed limiter; 2 operation: (a) switch the electrical switch test line of the detecting instrument to the switch terminal of the appliance; B) connect the measuring instrument to the 220V power supply, measure the diameter of the nodules of the wire rope and the grooved wheel, calculate and calculate the perimeter; C) turn on th