虚拟内存的设置（Virtual memory settings）.docVIP

虚拟内存的设置（Virtual memory settings） This paper introduces the settings of virtual memory and the solution of related problems. Memory plays a big role in a computer. All the running programs in the computer need to be executed by memory. If the program is large or large, memory will be exhausted. In order to solve this problem, the use of Windows virtual memory technology, which is a portion of hard disk space to act as memory usage, memory footprint when finished, the computer will automatically call the hard drive to act as a memory, to ease the tension of memory. As an example, if the computer has only 128MB of physical memory, when reading a capacity for the 200MB file, you must use the virtual memory file is relatively large, after reading the memory will be stored in virtual memory, after waiting for the memory to store all the files to the virtual memory, follow will be the virtual. The stored documents released to the original installation directory. When the system is running, the first will need instructions and data from the external memory (such as a hard disk, floppy disk, CD etc.) into memory, then CPU read from memory instructions or data are calculated, and the result of the operation is stored in the memory, the memory effect is like a two hand effect. When running a program requires a large amount of data, occupy a lot of memory, the memory of the warehouse will be filled, in the warehouse in one part of the data is temporarily not occupy the limited space, so this part should be inert data please go out to make room for the activity of data. Then you need to create another backup repository to store the lazy data. Because the hard disk space is very large, the Microsoft Windows operating system will reserve the warehouse address on the hard disk, the backup warehouse is virtual memory. By default, virtual memory is stored in the system partition of the hard disk using an exchange file named Pagefile.sys. Manually set up virtual memory By default, is