主机安装注意事项（Host installation notices）.docVIP

主机安装注意事项（Host installation notices） Chapter I installation of the ships main engine Learning objectives Knowledge target 1. Master the work contents of the host installation; 2. Learn the contents and methods of the base preparation; 3. Learn the method of host hoisting; 4. Grasp the positioning method of the main engine: according to the axial flange positioning; According to the axial line positioning; 5. Learn the fixed method of soil machine; 6. Master the installation method of large and low-speed diesel engines. Ability target 1. The base will be prepared; 2. Able to hoist the host; 3. Locate the host; 4. Able to set the host; 5. The disintegration and assembly of large, low-speed diesel engines: stand, main bearing and crankshaft, rack, cylinder body, and live Plug and cylinder head. Section 1 overview The ships main engine is the core of the ship power plant, and the quality of the installation is directly related to the normal operation of the power plant and the navigation performance of the ship. Host type diesel engine, steam turbine and gas turbine, different types of host, have different structural features and working way, in the boat when installation should be used according to different models and the corresponding technological process. Diesel engine is one of the most widely used mainframes. This chapter mainly discusses the installation process of diesel engine. Power passed to the propeller shaft system of host, the host connected to shaft system, main engine, shafting and propeller form an organic whole, so the host should be taken into account together with the installation of shafting installation. In shipbuilding, the installation sequence of the main engine and shafting is no more than three kinds: the first axial system and the host; First the main engine and the axial system; The main engine and shafting are installed simultaneously. Install the shafting on the berth, and then install the main engine with the shafting, which is a kind of