主机13t（The host 13 t）.docVIP

主机13t（The host 13 t） Question 1: the purpose of a diesel engine is (). A. The host is in constant state of use B. the emergency equipment is in working condition C. the power plant is in constant use D. The auxiliary equipment is in constant use Answer: C Problem 2: diesel engine stand-by work includes (). Ⅰ. Proofread the clock with the steering gear Ⅱ. Prepare Ⅲ warm-up with each system. Open the emergency bilge suction valve Ⅳ. Transfer, car and commissioning A. Ⅰ + Ⅱ + Ⅲ B. Ⅰ + Ⅱ + Ⅳ C. Ⅱ + Ⅲ + Ⅳ D. Ⅰ + Ⅲ + Ⅳ Answer: B Problem 3: most of the preheating methods used in modern Marine engine warm-up cylinders are used (). A. Steam heating main engine circulating water tank B. The electric heater heats the main engine cooling water C. Heating and cooling water in the expansion tank D. diesel engine cooling water heating for main engine cycle Answer: D Problem number 4: the method of engine cylinder heating cylinder has (). Ⅰ. Power diesel engine cooling water circulation within the host Ⅱ. Steam heating temperature and start the pump in the expansion tank Ⅲ. Steam heating or electric heater host freshwater and start fresh water pump A. Ⅰ + Ⅲ B. Ⅰ + Ⅱ C. Ⅱ + Ⅲ D. Ⅰ + Ⅱ + Ⅲ Answer: D Problem number 5: the engine heating machine includes (). Preheat preheat Ⅱ Ⅰ. Cooling system. The fuel system Ⅲ. Preheat Ⅳ lubricating oil system. The cylinder oil preheating A. Ⅰ + Ⅱ B. Ⅰ + Ⅲ C. Ⅱ + Ⅲ D. Ⅱ + Ⅳ Answer: B Problem 6: the commonly used method to preheat the lubricating oil system during a large Marine diesel engine is (). A. Start the oil separator to preheat the oil B. Warm up steam in the oil circulating cabinet C. Warm up the electric heater in the oil circulating cabinet D. Open the oil pump in the piping to warm up steam Answer: A, Problem number 7: note that the following error operation in the preparation of the cooling system is (). A. Open cylinder jacket fresh water circulating pump B. Open the seawater circulating pump C. Open the piston cooling pump D. Open the