电机与拖动基础6章（Motor and drag base 6）.doc

电机与拖动基础6章（Motor and drag base 6） Chapter 6 electromotive force and magnetic potential of ac motor armature winding Chapter 6 electromotive force and magnetic potential of ac motor armature winding Armature is a key part of electromechanical energy conversion in the motor, the direct current electromechanical armature refers to the rotor part, and the armature of ac motor is the stator part. For the requirement of ac motor armature winding, firstly, the electromotive force of a certain size and sinusoidal waveform can be induced, and three-phase electromotive force symmetry is required for three-phase motor. When the winding is arranged, it can satisfy the electromotive force requirement and meet the demand of the magnetic flux. 6.1 electromotive force of ac motor armature winding Analysis method, analysis method: a single conductor, wire turn the electric potential and induced in the coil and a single coil of induction coil and electric single conductor, wire turn of the induction electric potential induced by a single coil group - one phase winding induction electric potential of electric potential by a phase winding induction potential 6.1.1 conductor electromotive force Mechanical point of view: the entire surface of the rotor machine geometry Angle of space, with beta table mechanical point of view: the entire surface of the rotor motor space geometry Angle, = 360 °, beta = 360 ° electrical Angle: a pair of main pole of the space distance using geometric Angle, electric Angle: a pair of main pole by geometric Angle of the space distance, a 360 °), called space electric Angle space Angle. 360 ° (PI) 2, called the space electric point of view. In alpha If there is p to the main pole to the main pole motor, 360 ° that if there is the main pole motor, the total space of the corresponding electric Angle alpha is p * 360 °, forever is 360 °, thus there are due to mechanical Angle beta for ever ° Alpha = p beta, When analyzing the principle of the motor, the principle