生产过程与工艺（Production process and process）.doc

生产过程与工艺（Production process and process） The products of the chemical industry have (). A, steel; B. Coal; C. alcohol; D. Natural gas. 3. A kind of heat-polymerization compound obtained by catalyzing polymerization with ethylene is (). A, PB; B, PE; C, PVC; D., PP. 4. Which of the following substances () is a natural fiber? A, adhesive fibre; B. carbon fiber; C. asbestos; D, nylon. 5. Synthetic ammonia reaction process: N2 + 3H2? NH3 + Q, which is helpful for quick reaction conditions is (). A, high temperature and low pressure; B. High temperature and high pressure; C, low temperature high pressure; D, low temperature and low pressure. 6. Under suitable technological conditions, the hydrocarbon cracking can be obtained by the following products (). A, acetylene, ethylene, ethanol, acetic acid, butylene, aromatic hydrocarbon; B, acetylene, ethylene, propylene, butylene, butadiene, aromatic hydrocarbon; C, acetylene, ethylene, acetaldehyde, butylene, butadiene, aromatic hydrocarbons; D, ethanol, ethylene, propylene, butylene, butadiene, aromatics. 7. Industrial use () to absorb trioxide to prepare sulfuric acid. A, water; B. Dilute sulfuric acid; C, 98% sulfuric acid; D, 90% sulfuric acid. 8. The following description of ammonia synthesis catalyst, which is correct () The higher the temperature, the smaller the internal surface utilization; B, the higher the ammonia content, the smaller the internal surface utilization; The greater the size of the catalyst, the greater the utilization of the internal surface. D. The smaller the catalyst, the smaller the flow resistance. 9. The polymer at both ends of the molecular chain of the axial molecular chain is referred to as the (). A. orientation polymerization; B. Polymerization; C, random polymerization; D, bulk polymerization. 10. The raw material for the production of ABS engineering plastics is (). A, dithin, styrene and propylene; B, dithin, styrene and acrylonitrile; C, dithin, styrene and ethylene; D, dithin, styrene