生产与作业选择（Production and job selection）.doc

生产与作业选择（Production and job selection） Production and operation management review questions and answers (single choice questions) 1. The production line composed of the equipment cannot be equal, and the capacity of the production line is determined (). A. manual operation ability b. minimum working capacity c. artificial management ability d. maximum process capability 2. Static investment payback period is applicable to assessment () A. Short-term programme b. medium-term plan c. long-term programme d. short, medium and long-term programmes 3. Product quality indicators can reflect the appearance quality of products. The following shall not be of the appearance quality of the product () A. work accuracy b. product appearance c. product package d. product color 4, some mechanical enterprise, there are two main section, the assembly and machining, assembly production cycle known for 10 days, machining production cycle for 16 days, the section between the safety period of 2 days, is the enterprise machining production lead time for () A. 12 days b. 24 days c. 26 days d. 28 days 5. The meaning of the symbols used in the process flow chart is () A. test b. carry c. work d. store 6. When abnormal loss of working hours (), only verbal reports are made, and abnormal reports are not filled. A. 10 b. 15 c. 20 d. 30 7. The abbreviation for product assembly and packaging process control is () A.F QB B.F QC C.A QL d. f QA 8. When the net present value is equal to (), the corresponding discount rate is nearest to the intrinsic reward rate of the scheme itself. A. 0.0005 B. 0.005 c. 0.05 d. 0.5 9. The production process that basically limits the production capacity of the enterprise is () A. general production link b. assist production link c. lead production link d. any production link 10. Stable production, relatively single product variety, large production, and relatively stable production process of the workshop and the division of labor in each workshop. A. Advance method b