修改记录（Modify the record）.docVIP

修改记录（Modify the record） In the future, it will focus on checking and improving each function in the software, and updating the new specifications 2011.06.03 The following functions in the steel structure calculation module are improved: Cross-section parameter inquiry: hot rolling H steel warehouse was updated according to GB/T 11263-2005 Weld calculation: added the WORD format calculation book, added the custom material library, and increased the data storage and reading Bolt group calculation: added the WORD format calculation book, and increased the data storage and reading 2011.05.20 The blizzard load was checked and some data errors were fixed 2011.05.10 To update the new seismic standard of fortifications 2011.04.15 Add support for AutoCAD2011 and 2012 2011.04.02 Correction of left hand rebar in the structure drawing module: 1. Fix the problem that cannot be saved in the ACAD2000 ~ 2006 version 2. Modify the reinforcement of beam stirrup with the original stirrup 3. Add the option of whether or not to move by the beam 2010.10.29 The batch print function optimization in the software setting module - add the selection of the set for batch printing Function optimization of round tube truncation line in the structure drawing module - add point direction In character tool module, character statistics function optimization - add double - click location function 2010.10.28 In the general drawing module, the straight line sorting function is added to make the selected line or PLine line end to be an integer multiple of the modulus between the selected reference points and the dx and dy. Layer and display module of the layer switch function enhancement, in addition to the ability to quickly set the current layer, can also quickly switch its layers. 2010.08.08 In the general drawing module, the mirror feature is added, so that the selected multiple shapes can be mirrored according to the direction of the specified mirror. Add the function of PKPM standard layer result m