钢筋技术交底（Technical disclosure of reinforcement）.doc

钢筋技术交底（Technical disclosure of reinforcement） A project overview The use of reinforced steel bar specifications, more. In order to facilitate the construction, all the construction site all the production in steel processing, steel to ensure timely supply, ensure the smooth progress of the project. Two, material preparation 1, steel: all approach reinforced must have the certificate to get out. After entering the bar must be inspected before use. Materials should be in accordance with the material supply plan for the supply of timely delivery, the approach should be classified listing piled reinforced. Check semi-finished steel specifications, size and quantity of single match material. 2, block: according to different parts of the thickness of the protective layer of cement mortar with pad or plastic pad (card) block. 3, binding wire: the 20 ~ 22 galvanized wire. Three, the forming process of steel Steel processing shall be according to the construction sequence: beam, pile cap, reinforced basement floor, reinforced basement wall columns reinforced, basement slab reinforced wall column reinforced, conversion layer to two layer slab reinforced wall column reinforced layer, standard, standard layer beam plate and roof beam board, roof frame reinforced steel bars. And parts, specifications listed neatly stacked classification. Four, steel processing 1, reinforcement force and bending hook shall comply with the following provisions: A, reinforced grade end should be 180 ~ 2.5 times of hook, the bending inner arc diameter should not be less than 3 times the diameter of the steel bar, hook bend straight section length shall not be less than the diameter of the steel bar. B, when the design requirements, the need for 135 degrees to the end of the steel bar hook, curved HRB335 grade, HRB440 grade steel and the inner diameter of not less than 4 times the diameter of steel bar, the hook bend length of the straight part shall comply with the design requirements; C, bending st