钢筋配料（Reinforcing material）.doc

钢筋配料（Reinforcing material） The second chapter gangjingong map and ingredients Section 2 - 1 gangjingong map To complete the work of reinforced steel processing and installation tasks, must learn to read drawings. This is the first task. Construction of civil engineering, generally can be divided into construction plans and construction plans in two categories. The two part includes the structure construction drawing plan and detail. Which part of the construction plans of the reinforced concrete structure of reinforced engineering, is must learn to understand, otherwise it can not be of steel processing and installation. A look, steps and methods Construction drawings of a unit project, less to several dozens, hundreds more. So many drawings to step by step, to focus on, linked to each other, to understand it, can not go wrong in the construction. In a set of drawings, generally have a general description on the home page, and each drawing in notes or partial instructions. In the general description generally include: technical and economic indicators design basis, design principle, structure, characteristics, component selection, the material construction requirements and matters needing attention. Map notes are added and explanation of some expression of the requirement in the picture is not clear or specific parts, it is an indispensable part of drawings. In the picture, we should first look at the general description page. See the general description, there will be a preliminary complete concept for the entire project. In the reading process, attention should be paid to each note in the figure. This will be good for understand construction drawings. The construction graph reflects the appearance of buildings and the type, the internal structure of practice. It is the basis for the construction of. In the picture, not the construction plans and construction plans to cut apart, together, see reference. That is to say, look at the construction drawing, to associate