钢筋图集03g101常识（Steel Atlas 03g101 common sense）.doc

钢筋图集03g101常识（Steel Atlas 03g101 common sense） Reinforced.Txt Atlas 03G101 common sense occasionally to look back, otherwise, always in search, do not know what you have lost. Men money relationship, women pay between husband and wife, men and women rushing to pay friends. Men love women with eyes, the most vulnerable to confuse beauty; women love men, the most vulnerable to torture sad. Atlas of reinforced 03G101 common sense (1) In 2010 08 reprinted reprinted from the leaves of 11 08:41 (0) reading comments (0) category: personal diary Report 1: 0.4LaE+15d and LaE to compare the value of it. 1, do not put 0.4LaE+15d and LaE. LaE is the direct anchoring length standard. When anchoring, anchoring machine changes, bending point bar barber born nature so, should not take LaE as a measure of the total length of anchoring standard, otherwise the error belongs to the concept. The 0.4LaE+15d and LaE are two different concepts, there is no comparable premise. Please look at the label 2, 03G101-1 Atlas fifty-fourth page frame beam end support of the following: extending to the outside of the column (column longitudinal reinforcement inside), this is the first, and the back half of the sentence and 0.4LaE is a requirement for checking straight anchor horizontal section length. This requires us to first beam longitudinal reinforcement extends to the lateral column, and then check the direct anchoring length of horizontal section, can only be longer than 0.4LaE, but not shorter than 0.4LaE. 3, as for the straight hook longitudinal reinforcement frame beam bending the end of 15d, is a structural requirement. The structural requirements is a technical requirement for concrete structure, structural requirements to be calculated, must be performed. As for why the provisions of the 15d? Professor Chen said that this is the result of mechanical tests, there are internal forces in the straight hook 5D to 10d (deformation), there is no place to 15d. So, when the beam bearing (frame col