马桶安装过程（Toilet installation process）.docVIP

马桶安装过程（Toilet installation process） Buy a toilet: First of all, you need to know the form and distance of the required outfall. The form of the sewage outlet is generally divided into two kinds: ground arrangement and wall arrangement, and the general domestic toilets are arranged in the ground. Mouth distance refers to the distance from the axis of the sewage outlet to the edge of the toilet (usually the back edge of the body). Its very simple to install toilets: 1. leveling the ground so that the sewer pipe is slightly above the ground (first look at the difference between the discharge level of the new toilet and the edge below). 2. place the toilet flange (a gelatinous circle) on the aqueduct. 3. press the toilet from above to the flange. 4. connect the water supply stub. 5. when the ground is dry, place glass gel on the floor where the toilet is in contact with the ground. Ccccccccccccccc1, first measure the hole distance of the two fixed holes of the toilet, mark on the floor, hit two fixed toilets, and use the expansion screw size of 8 millimeters; 2. Clean the floor; 3. Put the sealing ring at the exit under the toilet. The sealing ring is soft and soft, and the size can be enlarged or narrowed according to the size of the outlet; 4. Put the toilet seat on the screw and screw the nut; 5 、 take the water pipe and turn off the angle valve in advance; 6. Fit the button on the lid; 7, the toilet ground circle, hit the white glass glue, scrape with your fingers. 8, test the water, all OK gggggggggggggg dry installation method: 1, the ground defecation pipe from the ground 5mm height saw off, saw the mouth should strive to smooth. 2, the toilet installation plan on the ground, the use of a round hole in the bowel pipe. Arrange the installation line on the drawing, drill the drilling machine according to the location of the installation hole, 3/8, and the deep 55mm mounting hole. 3. The nylon wall plug is inserted into the mounting hole. 4. Turn the toilet on the r