电工笔记（Electrician note）.doc

电工笔记（Electrician note） This paper contributed by wdelwis. Doc document may at the WAP end of the browsing experience poor. Suggest you select TXT, or download the source file to the machine view. The four Workshop - Liu Shuai Practice summary Time flies, now Im in the electrician job training for more than 4 months. In this process, the guidance of the teacher and his feeling that I have a certain understanding of the position of the electrician, master some skills. Electrical requirements are far from the theoretical level, but also have rich experience. Aiming at the fault of electrical equipment, may have a lot of factors, which depend on our usual experience, through the analysis of equipment fault site investigation and analysis, so as to effectively carry out the maintenance of the equipment. Electrician job is also a requirement to highly careful and responsible positions, engaged in electrical maintenance, to achieve a steady fine, not urgent and disorder not otherwise, will likely lead to dangerous accidents and personal safety. During the internship, to continue to accumulate experience, analysis of this type of equipment failure and the corresponding treatment method. Summarize the study and practice of the four months, my knowledge of electrician is as follows: - Electrical tools commonly used electrical tools, have electroscope screwdriver, pliers, pliers, electric iron, electric knife, measuring tools are commonly used in digital multimeter, clamp current meter, MB European table. In electrical equipment maintenance, reasonable use of these tools can be handy for work. For example, in the maintenance of equipment is the first to use the electroscope measurement equipment is off, the first step is safe. All the tools use must pay attention to the insulation is intact, and the matters needing attention in using. We determine the measurement tool is the normal operation of equipment is basis and not reasonable, the correct use of these tools is the main m