电工识图（Electrical engineering drawing）.doc

电工识图（Electrical engineering drawing） Many kinds of electrical diagram, this paper presents only the schematic diagram, circuit diagram, logic diagram and wiring diagram. Show that the scale of the system, the overall scheme, composition, main features, need to sketch. Said system, electrical device principle, analysis of circuit characteristics to the circuit diagram. Show the connection of each element between the electrical device, convenient installation and wiring to wiring diagram. In digital circuits, and show that the logic diagram function to realize the logic function of them in addition to the general rule following electrical diagrams, and their characteristics. 1: the expression of electrical diagram: 1, sketch: is the use of graphic symbols, annotated boxes or simplified shape represents a diagram of the system or equipment in the relations between parts and connections. Most of the electrical diagram belong to the diagram. Such as sketch, logic diagram, function diagram, circuit diagram, wiring diagram etc.. Sketch is not simple, but a simplified form. Table 2, figure: a new kind of figure is good, it is by combining the number of special graphic symbols and text description of the few, to describe a relationship between two or more than two variables, such as curve diagram, sequence diagram, function diagram. Chart diagram can also be. It is not understood as a chart chart, because the expression chart is mainly used instead of table map. 3, the data table is content with an expression are arranged to explain the system, the relationship between the equipment or part of the connection, can be referred to as the table, such as equipment etc.. Second: schematic diagram (also known as the system map or diagram) is annotated with the symbol or frame in the basic composition of system or subsystem, a sketch of mutual relations and main characteristics, from the point of view of system design appeared briefly expressed the overall program, the relationship