环保水性耐高温丝印油墨的特点及应用（Characteristics and application of environmental friendly water resistant high temperature screen printing ink）.doc

环保水性耐高温丝印油墨的特点及应用（Characteristics and application of environmental friendly water resistant high temperature screen printing ink） The characteristics and application of high temperature resistant environment-friendly water-based screen printing ink At present, in the packaging and printing, environmental protection type high temperature (121 DEG to 150 DEG) screen printing ink has become the focus of attention. The so-called environmental protection high temperature resistant printing ink, is in the packaging product surface has been completed graphic screen printing process, printing ink layer can be adapted to heat water soluble ink layer, and has a certain water resistance, to adapt to environmental protection, decoration and substrate with ink. Environmental protection high temperature resistant ink screen printing will not change its process because of environmental protection, high temperature resistance. It is characterized by diluted with purified water in the regulation of ink, especially when printing products under certain temperature, the ink film printing ink will improve the fastness, and not because of the environment heat causes the ink film softening, adhesion caused by defective or even scrapped. The products according to the requirements of user needs and the actual printing process, the screen printing process are different. Therefore, this paper on the product formulation design and application are briefly introduced. The characteristics of water temperature of the silk screen printing ink: Water resistant printing ink is non-toxic, tasteless, non volatile organic solvent, low cost, wide material source, good gloss, resistance analysis, heat resistance, abrasion resistance and water washing, economy and health etc.. Water resistant printing ink according to the usage of the product, can be divided into: high gloss, gloss, Matt ordinary three. From the screen process can be divided into: manual screen printing and screen two types of rotary scree