彩电维修经验（Color TV maintenance experience）.doc

彩电维修经验（Color TV maintenance experience） 1 、 SKYWORTH 4T60 movement, child lock has the function of locking button, in the child lock state, can only press remote control to boot. In standby mode, +B is 16V. 2, the reasons for burning damping tube A, memory data poor, resulting in repeated burning damping tube (25T88HT (6D92)) B, high pressure package is bad (there is abnormal sound, may be a fire), resulting in repeated burning on the damping tube and pillow correction triode (SKYWORTH 29T61HT (6D90 movement) C, deflection caused by repeated burning of the damping tube (SKYWORTH 29TMDP) D and reverse capacitance decrease, resulting in repeated burning of two damping tube and pillow tube (SKYWORTH 29T61HD) E, the line in the deflection loop of the capacitor damage, resulting in repeated burning two damping tube and correction tube SKYWORTH 29T61HT (5D90) F, flyback pulse sampling capacitor (ceramic capacitors of hundreds of PF damage caused by burning two) damping tube (SKYWORTH 29T66HT) G, SKYWORTH color TV, such as reverse capacitance, correction capacitor and many other issues!!! H, S capacitor damage, resulting in repeated burning pipe, damping tube 3, CPU bus switch, control the voltage of the foot is not normal, will lead to remote control and the machine button failure 4, TCL HID29276H HD machine repeated burning power circuit Q805 (C1273) causes: Q805s work only in the standby time, two times after the start of this tube is not working, this is because of repeated burning tube boot when the tube are conducted, the differential pressure too high this tube power consumption is large, to check D813, D820, D821 of the three IN4001 is normal, the normal startup of +12V through the three diode voltage optocoupler. 5, TCL AT21266A trump card color TV (TDA16846) phenomenon is not automatic switch machine - replace R803 (2W4, 7M), or TDA16846 10 feet grounding. 6, Konka SA power supply maintenance experience All the parts are large area burn power damage SA machine (V