建筑结构cad（Building structure CAD）.docVIP

建筑结构cad（Building structure CAD） This paper contributed by touchheart123. PPT document may at the WAP end of the browsing experience poor. Suggest you select TXT, or download the source file to the machine view. Senior architecture of CAD advanced application architecture skills training March 19, 2011 The main content of learning The application of software architecture CADPKPM (PMCAD, PK, SATWE focuses on the other)? CAD structure introduced foreign software - ETABS, SAP2000 etc.. This program focuses on: software architecture CADPKPM PMCAD, mainly introduces the structure modeling, design, structure design of reinforced concrete floor, masonry structure graphic editing etc.. Including: the design of the original data input structure, reinforced concrete slab stress analysis and reinforcement calculation, drawing structure layout and reinforcement diagram. This program focuses on: software architecture CADPKPM PK (plane frame, two-dimensional analysis) introduced the use of line plane rod plane frame and frame design. Including: data generation, calculation and combination of internal force of the structure, calculation of width and deflection checking, beam crack, beam and column construction drawing. This program focuses on: software architecture CADPKPM SATWE (spatial analysis), the method for frame structure, shear wall structure calculation, including: data preparation, structural analysis, section checking component, beam and column construction drawing. Introduction to the first building structure CAD 1. structural classification 1) according to their geometric features (computational model) is different, can be divided into three categories: A. truss structure (frame) Plane rod system structure space truss structure Introduction to the first building structure CAD 1. structural classification 1) according to their geometric features (computational model) is different, can be divided into three categories: B. (thin shell structure) (shell) Introduction to th