彩页印刷价格（Color printing price）.doc

彩页印刷价格（Color printing price） 3) the balance of 30%, in the mold acceptance, after a few days after the use of the settlement balance, this approach basically close to the mold design, manufacture, use of synchronous operation. 4) in case the die fails, the die maker shall pay the compensation in addition to the full amount of the advance payment. The compensation is usually 1-2 times the deposit. (3) extraction parts production tooling cost profit added value: the mold design and manufacturing, mold use, only a small part of the investment funds to ensure the basic cost of mold manufacturing costs (or dont need to pay the cost of mold). When the mold is delivered, the production of the parts is started. Each part of the product is extracted and part of the profits are returned to the mold manufacturer as the cost of the mold. In this way, the mold manufacturing method and using method organically linked to the formation of profit integration, investment risk and benefit is closely linked, the technology, economy, quality and production efficiency, fully linked together, so also maximize the value and risk of die out. This approach is a current trend of lateral alignment. Its main features are: give full play to the mold manufacturers and the use of the advantages of the mold, the investment is relatively positive and reasonable. But for the mold manufacturers, the risk is greater, but the rate of return is more impressive. There are many ways to settle the mold, and they are different. But there is one thing in common, that is, efforts to make the mold technology and economic indicators organically combine to produce common benefits. From the valuation of the mold to the quotation, from the quotation to the contract price; from the contract price to the settlement price, that is to form a real mold price. Good quality and high price. Try to integrate the mould price with international practice. Constantly strive to produce high, fine and excellent mold, and form a c