建筑施工图画法（Construction drawing drawing）.docVIP

建筑施工图画法（Construction drawing drawing） The steps and methods of drawing construction drawing 1. determine the drawing number according to the complexity of building shape, number, layout and structure of the content, and the specific construction requirements, determine the number of drawings, do not repeat the content of expression is not missing. The pattern in the number of meet the construction requirements under the condition of less is good. Select the appropriate proportion of 2. 3. reasonable drawing layout layout to prioritize, evenly arranged compact, clear, as far as possible to maintain the relationship between the map projection. The same type of content, close pattern, concentrated in a few continuous or map drawing, so as to control access. The 4. method of drawing construction drawing construction drawing sequence is based on the general plan - elevation - Profile - detail in order to carry out. The first pencil papers, after checking, according to the linear national standard deepens line. A pencil or ink tracing deepen, the general order is: first draw the upper, lower after painting; draw the left, after the right side of the painting; draw a horizontal line, vertical line or after oblique line; draw curve, after drawing a straight line. For example, construction drawings Step 1. building plan drawing 1) draw all positioning axis, then draw the outline of walls and columns. 2) door window position, fill in the details, such as stairs, stairs, toilets etc.. 3) after checking, wipe off excess lines, according to the provisions of the linear deepening. 4) mark axis number, size, size, elevation of internal and external doors and windows number, index symbol and writing other text. At the bottom of the plan, also should draw the cutting symbol and the position shown in figure outside the appropriate compass on the legend, to show the range. Finally, write the name and the proportion on the plan below. Drawing steps of building elevation 2. building ele