对于带e钢筋的理解(For the understanding of e steel bars).doc

对于带e钢筋的理解(For the understanding of e steel bars).doc

  1. 1、本文档共9页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
对于带e钢筋的理解(For the understanding of e steel bars) For the E reinforced understanding 1, the relevant provisions in the code for design of concrete structures GB50010-2010 July 1, 2011 onwards 2, reinforced concrete steel - Part second: terms of hot rolled ribbed bar in GB1499.2-2007 The provisions of 7.3.3: there are higher requirements for designation of aseismatic structure: in Table 1 existing brands after adding E (e.g. HRB335E, HRBF400E) of the steel, the steel shall meet the following a), B, c)) requirements, other requirements are the same with the existing corresponding grades of steel. A) the tensile strength and the yield strength ratio of steel measured measured ROm/ROel not less than 1.25. B) reinforced measured yield strength and yield strength of the 6 provisions of the table feature value ratio is not greater than 1.30 ROel /Rel. C) reinforced the elongation at maximum force of not less than 9% Agt. 3, several provisions of the Code for design of concrete structures is not clear, according to the one or two frame, three seismic grade design of diagonal members (including ladder section) in longitudinal reinforcement should be used with the E bar, and as long as meet the strong cuby and super cuby elongation ; and the reinforcement of concrete steel specifications for seismic grade E steel and higher requirements; the concrete structure construction quality acceptance as a strong request to use the E, and to meet the reinforced approach review strong cuby and super cuby elongation requirements. 2, according to the current understanding of the existing reinforced with E on the market, only the regular manufacturers with the E steel to meet the strong cuby and super cuby elongation requirements, the future production of HRB335, HRB400 steel will not necessarily achieve strong cuby and super cuby uniform elongation the requirements of non formal manufacturers currently do not have the conditions for the production of E steel. It is understood that the reg

您可能关注的文档

文档评论(0)

f8r9t5c + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:8000054077000003

1亿VIP精品文档

相关文档