工程制图标准（Engineering drawing standard）.docVIP

工程制图标准（Engineering drawing standard） Engineering drawing standard.Txt which is a taboo collapse of the times, nobody stopped to you, only you stop yourself, the more you taboos have fewer achievements. There are many inferior grades, the highest grade of inferiority showed brag about what is genius. Engineering drawing standards Date: 2009-11-25 -------------------------------------------------------------------------------- Standard In engineering drawing, good graphic organization is the key to improve the efficiency and everything in good order and well arranged. 1. organize folders By the time section of your folder, such as d:\ drawings \2002 drawings. According to the project name to organize your folders, recommend the use of Chinese input, not overly simplified, but do not use simplified Chinese pinyin. According to the engineering design stage to name your folder. 2. layer and colour etc. According to industry standards and professional standards or software design company internal standard to define the layer. A design company only to adopt a standard. The layer name should not be used in 1, 2, 3 other meaningless number expression, should adopt English or Chinese characters. The different entities and colour printing, set different layer thickness. 3. uniform font A design company only to adopt a standard. The specified font style and font file name SHX Chinese. Because there is no national standard SHX Chinese font standard, even if the same font, font size, especially may also not unified, will lead to some specific layout errors, and even lead to the lost symbol. The font style name should not be too much, should be unified. Backup and share Chinese font SHX regulations of the company, and the same with permanent archive drawings. If there is some professional symbols using SHX shape file definition, the shape file is even more important than the font file. The uniform font width and height. 4. unified annotation style We used a variety of customized a