sketchup建模基本步骤（sketchup建模基本步骤）.docVIP

sketchup建模基本步骤（sketchup建模基本步骤） Basic steps of SKETCHUP modeling: 1, Preparation before preparation of drawing 2, Import the CAD file 3, Stretch each floor block 4, Open the window (whether to build the window frame, according to the actual situation needs to be carried out) 5, Add balcony (balcony made by the actual needs of the actual situation), outdoor staircases and other external needs of the components. 6, Add a page to determine the viewing angle of the module. 7, Export to the JPG image file to provide architectural images for the post processing phase. First, the following preparations must be made before importing the CAD: In the DWG file according to the actual situation of the need to remove all lines of layers. Be careful： The cleaning process should take full account of the advance and retreat relation of the sketch block, and ensure that the interior walls need not be removed. CAD graphics export, in the export of graphics, as required, you can separate the main body and balcony 2. in the SKETCHUP open program, select the user settings command in view, in the dialog box that appears: The basic unit selection of units in the form of select decimal mode. In the render option, select display outline and select one to deselect. This operation is designed to ensure that the lines in the imported DWG file become thin lines for accurate modeling. This step can also be done after importing the DWG file, with the same effect before and after Two, DWG file import: One Select the file option in the menu, select the Import command, and select the import DWG/DXF option in its submenu. After that, the system will automatically jump out of a dialog box, in the lower right corner of the dialog box, there is an option When you click, will come out a new dialog, this dialog box select units (mm, this option is recommended in this unit, the unit is to ensure that the CAD and CAD map into SketchUp in Figure 1:1 ratio remained in the model, it can be ensured in 3D in time