kzp6000盘式造球机（Kzp6000 disc pelletizer）.docVIP

kzp6000盘式造球机（Kzp6000 disc pelletizer） KZP6000 disc pelletizer I. overview 1 product usage The main equipment for iron ore pelletizing of KZP6000 disc pelletizer, iron powder, bentonite was mixed with a certain proportion of balling fog, producing pellet mixture needed. 2 product features KZP6000 disc pelletizer is practical in production and can be adjusted by tilting angle of ball body and change of disk speed. Adjust the speed of production and the size of pellets produced. 1) the working conditions of the product 2) installation conditions, indoor installation. 3) environmental temperature; 5~50 degree 4) altitude; 5000m. 5) a system of work; continuous work. Two, production specifications and technical parameters Disk size; the diameter of 6000mm Edge height 600mm Disk revolutions; 6.23r/min; 6,. 85r/min; 7.02r/min Production capacity; 56-65t/h Motor: rated power; 110kw Revolutions: 1480r/min Voltage: 380V. 60Hz Reducer: model: NY112 Speed ratio; 25 Bottom scraper reducer: model: XLED5.5-95-187 Speed ratio: 187 Open sized gear: Modulus: m=22 Speed ratio: 6.85 Thin oil station: model: XYZ-63 Nominal flow: 63L/min Cooling water flow: 3m2/h Oil pump motor power: 3kw 380 V 60 Hz Lubricating oil: 150# medium load industrial gear oil Hand dry oil station: model: SGZ-8 Fuel supply capacity: 8ML/ cycle Working pressure: 7MPa Grease: 2# calcium base grease Grease lubrication: Grease: 0# extreme pressure grease grease Lubrication phenomenon: open gear Environmental protection index: Equipment noise is less than or equal to 85 decibels (1m from the device) Make the ball spin: made by users request Three overview of the main structure of the product: Shape: length, width, height 7130mm * 5850mm * 5800mm total weight 4340kg Working principle： The motor through the speed reducer drives the working disc rotation, the material in the rotating plate, adding amount of water mist, when the material viscosity, material dripping into the ball, the ball ball after size two rotary sid