基于双闭环结构的线切割机自动分度.PDFVIP

∀ ∀ : 1001- 2265( 2010) 07- 0040- 04 基于双闭环结构的线切割机自动分度 * 加工控制系统研究与设计 杨继森, 张静, 万文略, 郑方燕 (重庆理工大学机械检测技术与装备教育部工程研究中心, 重庆 400050) : 针对时栅产品化过程中普通线切割机加工回转 度精度不足, 人工操作效率低的问题, 提出了利 用自制的时栅 度转台结合嵌入式系统技术, 研究并开发了一套线切割机自动 度加工控制系统该 系统以双微控制器为基础, 形成双闭环控制结构局部闭环实现加工系统的自动 度定位, 而系统闭环 实现整 个系统按工序自动 度和自动加工实际应用表明, 该控制系统不仅能够完成高精度 度加工, 而且能够实现无人值守自动加工, 大大提高生产效率, 降低生产成本 : 闭环; 时栅; 度转台; 线切割机; 嵌入式 : TG65; TP393 : A Research andDesign on Control System ofWEDM Automatic Indexing andMachining Based on Structure ofDouble Closedloop YANG Jise , ZHANG Ji g, WAN W e lue, ZHENG Fa gya ( E gi eeri g Research Ce ter of M echa ical Testi g T ech ology a d Equ ipme t, M i istry of Educatio , Cho gq i g U iversity of Tech ology, Cho gqi g 400050, Ch i a) Abstract: o improve the problem of the low indexing precision ofWEDM and inefficiency forhand op eration, One control system ofWEDM automatic indexing andmachining is proposed based on time grat ing indexing table and embedded technology. DoubleMCU is used to form double closedloop structure in the control system. hework ofautomatic indexing is complemented in the local closedloop, and the work of indexing andmachining is complemented in the system closedloop. he applications conform that high precision indexing andmachining is achieved, and the process is unattended. he production efficiency is greatly improved and the cost ofproduction is greatly reduced. Key words: closedloop; time grating; indexing table; WEDM; embedded 0 [ 1] , , , , 1 , 1 () , , ,