硅钢在连续退火机组浪形缺陷的控制.PDF

2013 年第3 期 ANGANG TECHNOLOGY 总第381 期 硅钢在连续退火机组浪形缺陷的控制 马云龙，高振宇，罗理，林刚，刘立新，王铁 （鞍钢股份有限公司冷轧硅钢厂，辽宁鞍山 114021） 摘要： 为了消除硅钢在连续退火机组产生的浪形缺陷， 对浪形缺陷产生的主要原因进行 了分析。 制定了相应控制措施，对炉内带钢张力、冷却段输出、碳套辊与带钢的同步性、无氧化 炉燃烧状态等参数进行了调整；在生产组织上安排高低牌号宽窄规格穿插生产、定期更换碳套 辊等，实施后效果明显。 关键词： 硅钢；连续退火；板形；缺陷 中图分类号： 文献标识码： 文章编号： （ ） TG335 A 1006-4613 2013 03-0049-04 Control of Waviness Defects of Silicon Steel in Continuous Annealing Line Ma Yunlong, Gao Zhenyu, Luo Li, Lin Gang, Liu Lixin, Wang Tie （Cold Rolled Silicon Steel Mill of Angang Steel Co., Ltd., Anshan 114021, Liaoning, China ） Abstract ： The main cause leading to waviness defects of silicon steel is analyzed in order to eliminate the waviness defects of silicon steel in continuous annealing line. And thus corre - sponding measures for controlling these defects are made by means of adjusting these parameters such as the tension of silicon steel coils in continuous annealing furnace, the output in cooling section and the combusting condition of the non-oxidation furnace as well as keeping the synchro - nization between carbon sleeved rolls and steel strips. In addition these measures such as manu - facturing high grade silicon steels and low grade silicon steels in turn in scheduling of production and replacing carbon sleeved rolls regularly are also taken. Good results are achieved after the measures are put into use. Key words ： silicon steel; continuous annealing; plate shape; defect 冷轧硅钢主要应用于电磁转换过程中的铁芯 为中间浪和边浪，二肋浪出现不多。 当中间浪形严 装置制造等， 而硅钢材料的板形质量直接影响铁 重时， 带钢中间产生瓢曲， 严重影响硅钢产品质 芯芯片的冲制过程及铁芯的叠装制造过程， 直至 量，当短时间调整困难时，还