CONVEYORS Design fundamentals for drive （输送机的设计基础）.pdf

CONVEYORS Design fundamentals for drive systems on conveyors By Luke Meakin* and Peter Saxby, Hatch 1. Keywords drives being designed which have not drives, motion at full load conditions Conveyor, conveyor drive, multiple drive, operated correctly are discussed in this may take many seconds. Ensure that the drive control system, variable voltage paper. Various trends which have led to zero speed trip timers allows for this. variable frequency control, variable speed these outcomes are discussed and method- • Ensure that the motor does not trip drive, variable frequency drive, second- ologies which should be employed during out on an arbitrary electrical limit ary resistance control (SRC), squirrel cage design to ensure fit for purpose outcomes that does not harm the motor (an 85% induction motor (SCIM), wound rotor are also discussed. maximum current trip is often set on induction motor (WRIM), fluid coupling, The broad areas discussed by this many mine drives). Proper setup of electronic soft starter, direct on line start, paper include: the MPR can eliminate this type of breakaway torque, acceleration torque, • Determination of conveyor resistances nuisance trip. conveyor resistance forces, conveyor ef- • Assessment of de-rating factors • Ensure that other instruments (oil ficiency, conveyor drive de-rating. • Features of various conveyor drive pressure, flow, temperature, zero technologies speed, vibration etc.) are bypassed for 2. Synopsis