丙烯酸铁红底中涂漆用途.doc

Intended Uses 用途 适用于工程机械、机床、电机、五金器件、建筑钢结构等用作底漆或中涂漆 As primer or intermediate coat, used for engineering machine,machine tool, electric machine, hardware parts and architectural steel structures etc. Product Information产品简介 干燥快。能在低温中施工、能抵抗弱化学品飞溅，具有优异的抗腐性能。 Short drying time, May be applied at low temperature. Its film may counteract splash of weak chemical, and therefore possesses excellent resistance to corrosion Application details 产品数据 Volume Solids 固体份 Around 48% 约48% Dry Flm Thickness干膜厚度 40-60microns 40-60微米 Theoretical Coverage 理论涂布率 7.5m2 /Kg Practical Coverage 实际涂布率 Allow appropriate loss 允许适量损耗 Storage and Handling 施工详述 Mix Radio 混合比 One package 单罐装 Method of Application 施工方法 Airless Spray 无空气喷涂 Recommended 推荐采用 Brush or Roller 涂刷或辊涂 Recommended 推荐采用 Conventional Spray 传统喷涂 Recommended 推荐采用 Thinner 稀释剂 SC001 Cleaner 油漆设备清洗剂 SC001 Pot Life 使用期 Not limit 没限制 Drying time 干燥时间 Substrate Temperature 底材温度 Touch Dry 表干 （min） Hard Dry 硬干 （h） Over coating Interval 覆涂间隔 Min最短 Max最长 35 15 5 ≤10 ≤20 ≤30 ≤4 ≤12 ≤24 4hours 小时 8hours 小时 12hours 小时 Not limit 没限制 丙烯酸铁红底/中涂漆的用途 丙烯酸铁红底/中涂漆的用途 Storageand Handling 贮存与管理 Storage 贮存 dry and cool conditions away from fire and heat source 贮存于阴凉干燥处 Pack size 包装规格 25Kg in 20 liter container 2 Flash Point 闪点 ＞28 Specific Gravity 比重 About 1.28Kg/L 约 1. Specification and Surface preparation 技术要求及表面处理 When used as primer: New steel structure must be blasted to be in acordance with Sa2.5 Standard or rustremoved with power tools to reach St3 grade ,Wash grease away with solvent, Keep the surface to be paint clean and dry. When applied as intermediate coat: Suitable