Guide to Documentation and Marking Part 5 （文档和指南第5部分）.pdf

Guide to Documentation and Marking – Part 5 Lifting Accessories, Slings Document reference LEEA 059-5 version 2 dated 23.02.15 Introduction. This guide is aimed at manufacturers, distributors and users of lifting equipment within the European Economic Area. It has been developed as a quick reference guide to ensure that lifting equipment is supplied with the correct documentation and marking as required by current legislation, standards and best practice guidance. LEEA 059-5 is one of a series of guides related to documentation and marking of a range of generic forms of lifting equipment as listed below: Part 1 – Manual Lifting Machines Part 2 – Powered Lifting Machines Part 3 – Lifting Machine Supporting Structures Part 4 – Lifting Accessories, Non-fixed load lifting attachments. Part 5 – Lifting Accessories, Slings Part 6 – General accessories and Components for slings. 1 © 2014 LEEA Document Reference: LEEA 059-5; version 2; February 15 Item Standard Required Information Chain Slings Documents to be supplied in accordance with the relevant legislation relevant standard: Assembly of one or more chains for attaching loads to the hook - EC Declaration of Conformity (guidance LEEA 030.1e) of a crane or other lifting - Manufacturers Certificate (guidance EN 818-4 / EN 818-5 clause 8) - Manufacturer’s instructions for use (guidance LEEA SI.1.3 and EN 818-6) Note: the EC Declaration of Conformity Manufacturers Certificate can be issued as a single document. Manufacturers Certificate