JOURNAL OF INFORMATION, KNOWLEDGE AND （期刊的信息、知识和）.pdfVIP

JOURNAL OF INFORMATION, KNOWLEDGE AND RESEARCH IN MECHANICAL ENGINEERING DESIGN AND DYNAMIC ANALYSIS OF70T DOUBLE GIRDER ELECTRICAL OVERHEAD CRANE 1 2 APEKSHA.K.PATEL, PROF. V.K.JANI, 1M.E.[CAD/CAM] Student, Department Of Mechanical Engineering, C.U.Shah College Of Engineering and Technology, Wadhavan, Gujarat 2 Professors,Department Of Mechanical Engineering, C.U.Shah College Of Engineering and Technology, Wadhavan, Gujarat Apeksha_prod09@ veera.jani@ , ABSTRACT : Main Component of Overhead Crane is Girder Beam which transfers load to structural member. In Present Practice, industries overdesign girder beam which turns costly solution. So, our aim is to reduce weight of girder which has direct effect on cost of girder and also performance Optimization is done for fatigue (life) point of view. In this paper FE analysis of girder beam is carried out for the specific load condition i.e. turning operation. Here, we done a mathematical design calculation crane component, and thrust forces are used in FE analysis. Here, we used ANSYS WORK BENCH V12.1.Software for the FE analysis of the girder beam. Through this analysis we get the result in terms of stresses and deformation and this result are within the allowable limits. Keywords—70T double girder electrical overhead crane, dynamic analysis of girder. 1. INTRODUCTION loads are responsible for the poor quality of Crane and hoisting machine are used for products and which in turn is also aggravated by lifting