MasterGuide AlliedMachine（MasterGuideAlliedMachine）.pdfVIP

MasterGuide Material Blue: steel Yellow: stainless steel Red: cast iron Free machining, alloy, tempered Ferritic Cr-steels, austenitic Grey cast iron, tempered iron, and structural steels CrNi-steels, martensitic nodular cast iron, CGI, sintered Cr-steels, duplex stainless iron Based on VDI 3323 CERATIZITs MasterGuide divides Green: nonferrous metals and Orange: heat resistant alloys White: hard materials materials into six main non-metallic materials / titanium Hardened steels (≥ 45 HRC), Wrought and cast aluminum Ni/Co-base alloys, Ti alloys chilled castings, hard cast irons groups. alloys, copper, copper alloys, Each is given a color, non-metallic materials according to the system partly adopted in ISO 513. Machining application type Application Each colored segment is divided into three The ideal application area for the insert is sections, and each section indicates the indicated by a black circle. Extended applications relevant machining application type: are indicated by an open circle. The CERATIZIT MasterGuide provides you with an easily understandable structure