PLEASE SEE THE LAST PAGE FOR AN （请看到的最后一页）.pdfVIP

Evaluation Board User Guide UG-133 One Technology Way •P.O. Box 9106 •Norwood, MA 02062-9106, U.S.A. •Tel: 781.329.4700 •Fax: 781.461.3113 • Differential Receiver Evaluation Boards for Amplifiers Offered in 8-Lead SOIC and MSOP Packages INTRODUCTION A reference voltage can be injected at Pin 4 of the DUT. Using The Analog Devices, Inc., differential receiver evaluation boards Potentiometer VR1, which spans the power supplies, the designer (for the MSOP and SOIC) make it easy for designers to quickly can adjust the reference voltage over a wide range. C7 provides assess the performance of a particular differential receiver bypassing on the wiper of VR1. A test point, TP5, is provided application circuit. The evaluation board is a bare board (that for monitoring the reference voltage. When VR1 is used, it is is, there are no components soldered to the board) that is very important to ensure that JU3 is shorted. flexible and allows for several feedback configurations, common- To minimize parasitic summing node capacitance, the ground mode and differential input terminations, reference voltage plane has been voided under and around Pin 5 of the DUT and applications, and other circuit features. Most resistors and the copper that connects to it. capacitors on the board are in 1206 packages. Differential termination is provided by R3, and common- DEVICES COVERED