Recommended loads for wire rope slings NSC（推荐负载钢丝绳吊索,NSC）.pdfVIP

National Safety Council Data Sheet I-380 Rev. June 2006 Recommended loads for wire rope slings the rope about 7-1 ire rope slings, the hazards surround- ⁄ 2 percent over wire rope Wing their use, and safety measures or with a fiber core. Wire core wire rope will alternatives to avoid injury will be covered in withstand temperatures up to about this data sheet. 400° F for a limited time, but corrodes when 2. Wire rope made from improved plow steel exposed to acids and other chemicals. and extra plow steel is recommended in the (OSHA regulation 1910.1 84[f][3] states construction of slings. Conditions can affect “fiber core ropes of all grades shall be per- or alter the strength and rated capacity of the manently removed from service if exposed wire rope, such as broken or frayed wire(s), to temperatures in excess of 200° F.”) corrosion, kinks, etc. Therefore, use only wire 4. Ropes used for slings vary in size from rope in manufactured approved condition in 1 ⁄ 4 inch to 4 inches. Because flexibility is the construction of slings. essential, the 6 by 19 classification is used when service requires a rope 1-1 ⁄ 8 Wire rope, construction and size inch or smaller. The 6 by 37 classification 3. It is preferable to make wire rope slings is used for slings made from larger rope. from improved plow steel or extra- The l