QC10 Aluminum Mold Plate TKMNA（QC10 TKMNA铝模具板）.pdfVIP

® QC-10 Aluminum Mold Plate QC-10 is among the first aluminum alloys specifically designed for a variety of mold making applications. QC-10 combines the high thermal conductivity of aluminum with higher hardness and strength, more uniform properties through thickness, and greater corrosion resistance than previous aluminum alloys. Available in thicknesses from 1 inch to 32 inches, QC-10 possesses extremely low quench sensitivity which assures mold makers of consistent machining through the entire thickness of the plate. QC-10 is full wrought, tem- pered, and stress relieved prior to delivery. QC-10 has been successfully substituted for P-20 in produc- tion injection molds making in excess of one million cycles. The tight grain structure allows for outstanding machinability with small chips, outstanding surface finish, very few burrs, and very fast CNC feeds and speeds. QC-10 can also be polished to a very fine finish (SPI A2). Many molds have been construct- Typical Mechanical Properties ed of aluminum employing slides and lifters. Thickness UTS YTS Elongation (in.) (ksi) (ksi) (%) Benefits 1 81 78 15 • Lower part cost through reduced cycle time (25% - 40% 4 80 74 14 typical reduction). 6 80 74 6 • Higher thermal conductivity permits flexibility in water line 8 77 71 8 placement and simplifies cooling sys