炉冶炼低碳钢终点氧含量控制.pdfVIP

44 5 Vol. 44, No. 5 2 0 0 9 5 Iron and Steel May 2009 蔡开科 (, 100083) : , , ( FeO+ MnO) , ,, R : ; ; : TF71 : A : 0449-749X( 2009)05-0027-05 Controlling Oxygen Activity in the Molten Steel at Blowing End- Point of BOF Steelmaking CAI Ka-i ke ( Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing 100083, China) Abstract Steel cleanliness is increased under customer. s requirement.Steel producers are striving to produce cleaner steels.T herefore, to reduce the quantity and size of nonmetallic inclusions in the steel is imperative, especially for high quality cold-rolled products. The main controlling is oxygen activity in the molten steel and FeO+ MnO in the slag at the blowing end-point of BOF steelmaking, because they are the main source of producing nonmetal inclu- sions. Based on our study work and recent literature,oxygen content control of low carbon at the blowing end-point of BOF and influence of the oxygen content at theblowing end on decarburization in the R vessel are discussed. Ac- cording to the results, decreasing measurements of end-point oxygen content are put forward. Key words low carbon steel; BOF; end-point oxygen content , Al2O3CaO # Al2O3 [ O] r(a [O] ) , :[O] r ,; , ( CSiMnAls ) , ( ArLFVD 1 转炉冶炼低碳钢终点钢中氧含量控制 R ) , ( Al2O3MnO # SiO2 CaO # SiO2 # Al2 O3 CaO # Al2O3) T[O] : , 30 Lm, T [O]= [ O] r+ [ O] j - 6 w (T [O] ) 30 @ 10 , 10