基于有限元搅拌头磨损机理研究_李秀娜.pdfVIP

Hot Working Technology 2014,Vol.43,No.7 基于有限元搅拌头磨损机理研究 1 2 李秀娜 ， 吴 伟 河北工业职业技术学院，河北石家庄 ； 河北冶金矿山管理办公室，河北石家庄 (1. 050091 2. 050011) 摘 要：搅拌头的磨损是影响搅拌摩擦焊接(FSW)生产成本的重要内容。 本文从FSW 工艺设计出发，应用数值模 拟技术，基于改进的Archard 理论建立搅拌头磨损模型，研究了FSW 过程中搅拌头的摩擦磨损规律及使用寿命。 这对 研究搅拌头摩擦磨损和使用寿命，降低生产成本以及推广FSW 技术具有现实的研究意义和实用价值。 关键词：有限元；搅拌头；磨损机理；改进Archard 理论 中图分类号： + 文献标识码： 文章编号： TG453 .9 A 1001-3814(2014)07-0212-03 Research on Pin Tool Wear Mechanism Based on Finite Element 1 2 LI Xiuna , WU Wei (1. Hebei College of Industry and Technology, Shijiazhuang 050091, China; 2. Hebei Metallurgy Mining Management Office, Shijiazhuang 050011, China) ： Abstract The wear of pin tool is an important content that affects the production cost of friction stir welding. The wear regularity of the pin tool was investigated during friction stir welding process from the starting of friction stir welding process. From the point of FSW process design, using numerical simulation techniques, based on the improved archard theory, the wear model of the pin tool was built, the wear regularity and service life of the pin tool in the process of friction stir processing were analyzed. This study has a practical significance and practical value in studying the wear and service life of the pin tool, reducing the produ