20CrNi2MoA渗碳轴承钢生产工艺的探讨.pdfVIP

16 64 Vol. 16( 64) 2010 3 Special Steel Technology 2010, No. 3 G20CrNi2MoA 李中友 ( 621701 ) :针对攀长钢公司渗碳轴承钢G20CrNi2MoA 采用 电炉+ 真空处理+ 电渣 生产试制的工艺中如何控制钢 中的[O] 倍夹杂及碳化物带状组织等问题进行了生产工艺的探讨, 对该钢形成批量生产, 以满足铁路用渗碳轴承 钢的要求具有积极的意义 : 渗碳轴承钢 非金属夹杂 碳化物带状组织 :TF762+ .4 : B : 1674- 0971(2010) 03- 010- 05 A Study on Production Process of G20CrNi2MoA Carburizing Bearing Steel i Zhongyou (Technology Center, Changcheng Special Steel Co. , td, Pangang Group, Jiangyou , Sichuan, 621701) Abstract: Focusing onthe problems such as how to control [O] , inclusions and carbide banded structures in the steel, and so on, which occurred in the process of trial- producing G20CrNi2MoA carburizing bearing steel by using EF+ VD+ ESR , this pa per studied the production process of the steel so as to meet the requirements of carburizing bearing steel for railway. This research has an obvious positive significance for the batch production of the steel. Key Words: Carburizing bearing steel, Non- metallic inclusions, Carbide banded structures 1 G20CrNi2MoA , G20CrNi2MoA : G20CrNi2MoA (1) + , , Ca- Si , (2) GB/T10561 , , A , 1 1 Table 1 Grades of the different inclusions 30%, 10% ~ 15% , A( B( C( D( 5%, G20CrNi2MoA , ) ) ) ) 130 , 15t , 1. 5