不同钢种离子渗硫层的抗擦伤性能研究.PDF

7 - Study on Anti scuffing Properties of Ion Sulfide Layers under Oil Lubrication , , , (, 100084) ANG Hai-dou, ZHUANG Da-ming, ANG Kun-lin, LIU Jia-jun (Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China) : 45 , FeS QP-100 , SEM XRD AES XPS , , , 45, : ; ; ; : TG156.8: A: 1001-4381 (2003) 02-0007-04 Abstract : Inorder to improve the anti-scuffing propertiesof high speedsteel, diesteel and plaincar- bon steel, low temperature ion sulfuration technology was utilized to process them. Sulfide layers, dominated by FeS phase, were produced on the surfaces of the three steels. The anti-scuffing and tribological properties of the sulfide layers were investigated by afriction and wear tester QP, -100 , - , . model ball platetester under oil lubrication SEM equippedwith EDX andXRDwereemployed to - , analyze the morphologies of cross section and scuffing surfaces of sulfide layers aswell as the sur- faces phase structure AES and XPS were used to detect the elements variation with depth and the. valence states of boundary lubricationfilms of scuffing surfaces respectively The results show that. - . the anti scuffing andtribological propertiesof all sulfurationsteels areimproved remarkably It can be ranked by the order of high speed steel-diesteel-plain carbon steel according to the extend of im- proved anti-scuffing and tribological properties. The differences of properties with different steels are mainly determined in the hardness, m