BalancePoint 7 Turbine Metrology（BalancePoint 7 涡轮计量）.pdf

BalancePoint 7.0 FAQS 1. What is BalancePoint 7.0? BalancePoint offers automatic, semi-automatic, or manual weighing as part of a balancing program that quickly determines the optimum rotor location for every blade in the set. In gas turbine and jet engine applications using non-integral compressor and turbine blades, the weight tolerance of the individual blades can significantly affect the balance of the assembled rotor. Even if the weight differential is small, if random assembly places more of the heavier blades on one side of the rotor, the resulting unbalance condition may be more than can be corrected by additional balance weights or corrective machining processes. This means time- consuming and expensive disassembly of the rotor. Since its introduction in January 2002, Turbine Metrologys BalancePoint software has become an industry standard for simple, fast, accurate, and affordable blade weighing and optimized placement. 2. Why is BalancePoint more accurate than other blade placement software? BalancePoint uses Turbine Metrology’s “Dimensional Tunneling Technology” to rapidly point the balancing algorithm toward a solution. This technology allows many millions more possible blade positions to be considered in the same amount of time as compared to conventional algorithms, leading to better, faster, solutions. 3. Will BalancePoint work with my existing electronic scale? BalancePoint can interface directly to any scale with an RS-232 or USB output . This allows blade weight data to be recorded quickly and efficiently without the possibility of pen-and-pencil errors. Data can be printed directly to logbook sheets with the User’s logo. The User can observe the blade distribution pattern from a Polar Plot and copy the Results output to an Excel spreadsheet. All results are saved for future reference. BalancePoint can be fitted to Turbine Metrology’s moment weight scales, as