Clarke’s and Park’s Transformations pudn（克拉克和公园的转换pudn）.pdfVIP

Clarke’s and Park’s Transformations BPRA047, BPRA048 Content 1 Introduction 2 Clarke’s Transformation 3 Park’s Transformation 4 Transformations Between Reference Frames 5 Field Oriented Control (FOC) Transformations 6 Implementing Clarke’s and Park’s Transformations 7 Conclusion 8 Reading Materials SUN Dan 2008-9-28 2 College of Electrical Engineering, Zhejiang University Introduction The performance of three-phase AC machines are described by their voltage equations and inductances. It is well known that some machine inductances are functions of rotor speed. ⎡vs 1 ⎤ ⎢ ⎥ (V ) v S ⎢ s 2 ⎥ ⎢v ⎥ ⎣ s 3 ⎦ The coefficients of the differential equations, which describe the behavior of these machines, are time varying except when the rotor is stalled. SUN Dan 2008-9-28 3 College of Electrical Engineering, Zhejiang University Introduction A change of variables is often used to reduce the complexity of these differential equations. In this chapter, the well-known Clarke and Park transformations are introduced, modeled, and implemented on the LF2407 DSP. Using these transformations, many properties of electric machines can be studied without complexities in the voltage equations.