CLASS 30 TAPE MEASURES Ace Industrial （类30卷尺 Ace工业）.pdfVIP

CLASS # 30 TAPE MEASURES These contractor grade tape measures are available in 33’, 25’, 16’ and 12’. They feature the pause button that allows you to extend the blade to the desired length and hold it there by pushing the button down. When you want the blade returned, simply push the lock up and the blade will automatically retract into the housing. The blades are standard bright yellow with easy to read measurements th in feet and inches and the upper scale is readable by 1/16 increments. They also feature the black diamond marking every 19.2”. The black diamond on the top scale starting at 19.2 inches is for truss layouts for 8-foot sheet goods, also referred to as the black truss markings. Originally the 19.2 was used in metric layouts so if you divide five into 96 inches (8 feet), it will give 19.2 inches, in other words, 5 trusses per sheet. The riveted metal tips of these tape measures are made to slide slightly the distance of its’ thickness which allows for an accurate measurement from its starting point. ITEM#: SIZE: DESCRIPTION: 499 33’ x 1” STANDARD TAPE MEASURE 500 25’ x 1” STANDARD TAPE MEASURE 504 16’ x 3/4 ” STANDARD TAPE MEASURE 505 12’ x 3/4” STANDARD TAPE MEASURE CLASS # 30 100’ 300’ TAPE MEASURES These contractor surveyor tapes are available in three styles and sizes. The 100’ fiberglass tape is enclosed in a heavy duty ABS plastic housing that will not crack or rust. It is a hand wind reel with a rewind ratio of 3 to 1. The tape reads both standard and metric. The 100’ Engineers’ fiberglass tape is an open reel type. It is 5/8” wide and has 1/10 foot readings on one side for Engineers and feet and inche