code change instructions Codelocks（Codelocks代码更改指令）.pdf

code change instructions STAYING IN CONTROL HAS NEVER BEEN EASIER MANY CODES TO CHOOSE FROM CL100 and CL200 locks can be used at home on doors, The CL100 and CL200 code chamber consists of 13 1. Take your CL100 or CL200 lock off the door by 6. Replace the code chamber plate carefully with the 2 garages and garden sheds, and at work in offices, workshops buttons from which the code is selected, and a ‘C’ button unscrewing the 2 screws in the backplate. red screws. and storerooms requiring restricted access. Available in Silver which is used to re-set the chamber after an incorrect 2. Press the C button to reset the chamber and place the 7. Check the operation of the new code, and make a Grey, Polished Brass and Stainless Steel. entry, and which must always be used as the first digit of lock case on a flat surface with the buttons down. written note of it before re-installing the lock. a code. Buttons may only be used ONCE in a code. For example, 1212 is not possible. 3. Remove the 2 red screws and carefully lift off the code