Composite Structure Engineering Safety （复合结构工程安全）.pdfVIP

Composite Structure Engineering Safety Awareness Course Module: Composite Materials Test Methods Dr. Dan Adams Director, Composite Mechanics Laboratory University of Utah Salt Lake City, UT 84112 (801) 585-9807 adams@ September 14-16, 2010 Composite Materials Test Methods AGENDA Constituent and Prepreg Test Methods Physical Test Methods for Composites Mechanical Test Methods for Composites Adhesives Testing Test Methods for Sandwich Composites Non-Destructive Testing Constituent Test Methods Fibers: CMH-17 Vol. 1, Chapter 3  Physical testing – Density, Thermal Properties  Mechanical testing –Tension Matrix: CMH-17 Vol. 1, Chapter 4  Thermal/Physical testing – Density, Electrical Resistivity, Coefficient of Thermal Expansion  Mechanical testing –Tension, Compression, Shear Fiber Characterization Testing : Examples Physical Testing: For constituent content (CMH-17 Vol. 1, Sections 3.3, 3.4)  Fiber diameter  Fiber density – ASTM D 3800, liquid displacement Mechanical Testing (CMH-17 Vol. 1, Section 3.5)  Tensile properties Single fiber tests ASTM D 3379 Tow tests ASTM D 4018 Matrix Characterization Testing: Examples Thermal Analysis (CMH-17 Vol. 1, Section 4.5)  Glass Transition Temperature, Tg  Thermal expansion properties Physical Testing (CMH-17 Vol. 1, Section 4.5)  Matrix density – ASTM D 792 or D 1505 Mechanical Testing (CMH-17 Vol. 1, Section 4.6)  Tensile properties - ASTM D 638  Compression, shear, flexure Prepreg Test Methods CMH-17 Vol. 1, Chapter 5 Focus on properties and characteristics of uncured prepreg  Fiber and resin content  Resin e