Consideration of protection angle method and （考虑保护角的方法和）.pdf

EMC’09/Kyoto 24S3-1 Consideration of protection angle method and lightning protection rules for sides of high-rise buildings in IEC 62305 standard Yasuo Kishimoto NTT Facilities Research Institute Inc Ueno Tosei Bldg, -27-3, Higashi-Ueno, Taitoh-ku, Tokyo 11-1, Japan kishimoto@ntt-fsoken.co.jp Abstract -- The protection angle and protection rules for lightning risk of strikes to the sides as negligible for heights up to 60 m, flashes to the sides of tall buildings described in the IEC 620 requires the protection of the upper part of structures taller standard were considered. The penetration depth of a rolling than 60 m (i.e. the topmost 20 of the height of the structure), sphere into the cone of the protection angle is estimated. on- and recommend the protection of allthe parts which may be is indicated. negligible flash frequency to the unprotected sides endangered above 120 mfor structures over 120 m. Key words: lightning protection, IEC 620, protection angle, The equations for the penetration depths of a rolling sphere rolling sphere, collection volume, high-rise building into the protected region presumed by the PAM method are I. INTRODUCTION considered here. The estimated results on