日立的DeskstarHDS721010CLA332硬盘驱动器控制器的更换-iFixit.PDF

Hitachi GST Deskstar HDS72 0 0CLA332 Hard Drive Controller Replacement Hitachi GST Deskstar HDS721010CLA332 Hard Drive Controller Replacement After replacing the board and replacing the BIOS IC from the original board, the drive was once more recogized. This allowed for the data recovery of some 000 pictures as well as other documents. Written By : oldturkey03 © iFixit — CC BY-NC-SA www.iFixit .com Page of 7 Hitachi GST Deskstar HDS72 0 0CLA332 Hard Drive Controller Replacement NTRODUCT ON Here is the failed hard drive from the HP 3 0- 037. When powered on, the computer did not recognize the drive in the BIOS and did not load the OS. The drive was never backed up and the owner really wanted her pictures of the drive. Since the drive did not experience any mechanical damage and, based on the history of these drives with their frequent PCB failure, decision was made to replace the PCB. Hopefully this would revive the drive long enough to remove the needed data. TOOLS: PARTS: T8 Torx Screwdriver ( ) 0A72947 0A90233 controller PCB ( ) Soldering Station ( ) © iFixit — CC BY-NC-SA www.iFixit .com Page 2 of 7 Hitachi GST Deskstar HDS72 0 0CLA332 Hard Drive Controller Replacement Step 1 — Controller  Here is the failed Hitachi HDS72 0 0CLA332. It does not get recognized by the computers BIOS and cannot get accessed by any other means. No clicking or other mechanical noises present  Turn the drive over to ge