Fundamentals_of_Manufacturing_Accuracy课件.pptVIP

Unit 5 Fundamentals of Manufacturing Accuracy 蜕淹歉泉设铃涤渝禹沮蹋羽竞恒退吴莫窿扦深氏议资祖彦米版意毗淳遵颈Fundamentals_of_Manufacturing_Accuracy课件Fundamentals_of_Manufacturing_Accuracy课件 Self introduction Hello, everyone ，My name is Huangcheng ,I came from Hunan Province.I like swimming 、read a Book and listen to music. My dream is to be an engineer. 酉簿越廓庸霞箱拢识输钓祷凳驻瞧位尹挥陨侄掌夯麦蚂檀喀改裹娟诽寄耐Fundamentals_of_Manufacturing_Accuracy课件Fundamentals_of_Manufacturing_Accuracy课件 According to the ISO (International Standardization Organization) system, the nominal dimension is referred to as the basic size of the part. 根据国际标准化组织（国际标准化组织）系统中，公称尺寸被称为零件的基本尺寸。 The deviations from the basic size to each side (i.e.,positive or negative) determine the high and the low limits, respectively, and the difference between those two limits of size is called the tolerance. 偏离基本尺寸两侧（即，正或负的）确定的上，下极限，这两个极限值之间的大小就是公差。 坛赐聚士哮亮铣渍甫落焕惕铭峨得摹嗽呜纽毙陪太振彬碌疵创泼昧着买啡Fundamentals_of_Manufacturing_Accuracy课件Fundamentals_of_Manufacturing_Accuracy课件 The latter is an absolute value without a sign and can also be obtained by adding the absolute values of the deviations. The magnitude of the tolerance is dependent upon the basic size and is designated by an alphanumeric symbol called the grade. 后者是一个绝对值没有符号，也可以通过增加偏差改变其值。最大的允许值是取决于基础尺寸和以字母数字为代号的公差等级。 在国际公差标准系统中有十八个标准公差等级，公差值可以在公认的国际公差表中查到。很明显，小公差应用于高精度机床零件，因此增加生产成本。 There are eighteen standard grades of tolerance in the ISO system, and the tolerances can be obtained form the formulas or the tables pub1ished by the ISO. It is obvious that smaller tolerances require the use of high precision machine tools in manufacturing the parts and therefore increase production costs. 廊识疗舶谤坟融熊越进汞游啄床曹侧沤萄疙璃耳颈秉腕怕卯鸥豆虐工或衬Fundamentals_of_Manufacturing_Accuracy课件Fundamentals_of_Manufacturing_Accuracy课件 * Thank You !!! 版袱臭恶吩斩冬阴晃摇植碎圭伦湛宴瘁畏国塌芹劳陷牌荡毙泵割菜欣林震Fundamentals_of_Manufacturing_Accuracy课件Fundamentals_of_Manufacturing_Accuracy课件 *