ABB传动调试软件DriveWindow介绍课件.ppt

DriveWindow 2 ;Introduction;Connection;OR;User Interface;Toolbar;Step button; Setting of parameters;Actual values;Graph preferences;Selected item can be removed from the Monitor by the DEL-key of the keyboard or -button from the Toolbar ;Monitor: Settings and scaling;Monitor: Operating;Workspace;Fault logger;Save parameter file to the PC;Download parameters into the drive;Create full Backup of the motor control board;Note! For safety reasons you cannot restore any drive while control of some drive is taken with DW=LOCAL control. The command in the menu is disabled (grayed).;DATALOGGER: Overview;You can set x-axis length of the monitor or a datalogger at any time. X-axis length of a datalogger can also change automatically when the datalogger is uploaded. Note! If a datalogger has never been uploaded, DriveWindow does not know for sure the size of a datalogger channel buffer. Thus DriveWindow does not do any checking about the x-axis length, until it knows more about the datalogger. When size of the datalogger channel buffer is known, DriveWindow does not accept improper setting of x-axis length.;Select the new signal by the mouse