防爆柴油机引射式废气处理装置设计研究.docx

防爆柴油机引射式废气处理装置设计研究摘要：现如今煤炭产业发展迅速，而安全生产问题日益突出，矿井瓦斯爆炸高居事故榜首位。作为井下动力源的柴油机在工作中排气温度达到600摄氏度，带来巨大安全隐患，降低排气温度成为废气处理系统的关键。因此本文依托该实际背景，进行防爆柴油机引射式废气处理装置设计研究和优化。本文将从下面几个方向进行研究：（1）依据废气处理箱设计要求及结构特点、巷道作业防爆柴油机尾气排温及有害气体浓度要求及干式排气系统的设计要求、构造及功能，来确定矿用防爆柴油机引射式废气处理装置（引射式排气管）的各结构参数。（2）利用SolidWorks三维造型软件,完成对引射式废气处理装置（引射式排气管）的三维建模。关键词：防爆柴油机；引射式废气处理装置；Design and research of the exhaust gas-beam treatment device for an explosion diesel primerAbstract：Now the rapid development of coal industry, and safety issues have become increasingly prominent, mine gas explosion in the top of the list of accidents. The diesel engine is underground power source. The diesel engine exhaust gas temperature is 600 degrees Celsius in the work. It is bringing great security risks, reduce the exhaust temperature as the key to the exhaust gas treatment system. Therefore, the article is based on the actual background, to design and research of the exhaust gas-beam treatment device of an explosion diesel primer .The article will study from the following directions: (1) According to the design requirements and structural characteristics of the exhaust gas treatment box, the requirements of exhaust gas discharge and harmful gas concentration of the explosion-proof diesel engine and the design requirements, structure and function of the dry exhaust system to determine the explosion-proof diesel engine Device (ejector exhaust pipe) of the structural parameters.(2) Three-dimensional modeling of the ejector exhaust gas treatment device (ejector exhaust pipe) is completed by using SolidWorks 3D modeling software.Key words:Explosion - proof diesel engine; ejector exhaust gas treatment device目 录摘要…………………………………………………………………………………IAbstract……………………………………………………………………………II目录…………………………………………………………………………………III1绪论11.1研究背景11.2防爆柴油机现状及发展21.2.1国外防爆柴油机现状及发展21.2.2国内防爆柴油机现状及发展21.3 防爆柴油机防爆技术31.3.1进气系统防爆技术及原理31.3.2排气系统防爆技术及原理41.4课题研究的主要内容和方案41.4.1研究内容41.4.2课题研究方案42引射式废气处理装置的设计62.1引射理论基础62.1.1引射原理62.1.2引射器的类别及应用72.1.3性能评定标准82.2引射器的设计方法82.3引射式